This valve has been designed for use on cylinders for reversible ploughs to obtain the automatic oil flow reversal, and therefore the reversal of the hydraulic cylinder which rotates the plough. It is provided with a double pilot operated check valve which provides leakage control for the cylinder in any position. The reversal of the cylinder is controlled by a pressure compensated relief valve set to exactly in the dead head point of the plough, generating more power and speed.
It can be assembled on heavy and unbalanced ploughs with cylinders with the following internal diameters:
40/50, 60/80, 80/100, 100/110, 110/130 mm.
V0282 V0290 V0300 V0302 V0320
Zinc-plated steel with internal parts in hardened and ground steel
Connect C1 to the cylinder’s rod side, C2 to the head side, P and T to the machine’s suply. Thanks to its shape, it can beassembled in-line on the hydraulic cylinder or directly fixed onto the plough by the threaded hole in the valve body.
BUNA N standard
guided poppet, negligible leakage. These valves are supplied with exchange pressure at about 150 Bar: according to your requirements, pressure setting can be modified by adjusting the pressure regulator.